How To Fix Power Steering Assist Fault Ford F150
The easiest way to reset the alert is to restart the car. This will reset the electrical components associated with the power steering system. Repeat this process two or three times. If the problem persists, you should visit a Ford dealership to have the system repaired. If the fault cannot be repaired in your local Ford dealership, you can contact the manufacturer directly.
What Causes Steering Assist Faults?
The steering assist fault in this case is likely tied to the electric steering module, which relies on torque and angle sensors to detect wheel movement. This module regulates the torque and rotation speed of the front wheels, particularly reducing power assistance during high-speed steering maneuvers. A malfunctioning or damaged sensor within this system can profoundly impact the vehicle’s speed, power assistance, and overall steering performance. Therefore, if you suspect that your F150 may be experiencing a steering assist fault, it is advisable to promptly consult a qualified mechanic for diagnosis and repair.
What Happens When Electric Power Steering Fails?
You may have experienced a sudden loss of steering power while driving at highway speeds. The vehicle will show a “service advance trak” light, which means the battery is low. If you notice this light, turn signals will no longer work, and traction/stability control will no longer function. Power steering failure can be a result of a number of problems with the power steering rack.
Essentially, the electric power steering system contains an electric motor, dedicated module, and torque sensor. These components are connected to the rest of the vehicle and are powered by wiring and fuses. When one or more of these components are damaged, the power steering system will no longer function properly, causing the vehicle to lose balance. The electric power steering module also requires repair if it displays a warning light.
How Do I Reset My Electric Power Steering Pump?
If you’ve had a problem with your power steering pump in Ford F150, you may need to learn how to reset the electric power steering pump. This electronic system receives data from the angle sensor and torque sensor and reports it to the power steering module (PSCM). When the angle sensor malfunctions, the vehicle may lose balance and turn over. The problem can also be a result of a faulty wiring connection.
Restarting your car can reset the error codes and get the power steering back to normal. Sometimes, the steering rack is the problem, and a simple repair to it can save you a lot of money in the long run. If it doesn’t, you can try to replace it. Hopefully, this will resolve the issue. If not, you may have to replace the steering rack. If you’ve tried resetting the electric power steering pump without any luck, here’s how.
In some cases, incorrect wiring can cause steering to lock. Broken or damaged wires can’t send commands to other sensors. A professional programmer specializes in electric circuits. Make sure all of the wiring is replaced, since broken wires can interfere with the electric power steering pump. You should also check the rack. It may be corroded or have a faulty connector. Oftentimes, a broken fuse will prevent steering lights from working properly. If you’re still having trouble with steering, you should take your vehicle to a shop near you.
Here are some additional tips:
- If the power steering fluid is low, add the correct type and amount of fluid.
- If the power steering hoses or belts are damaged, have them replaced.
- If the power steering pump is faulty, it will need to be repaired or replaced.
- If the power steering control module is faulty, it will need to be repaired or replaced.
Possible fixes to the Ford F150 Power Steering Assist Fault
First steps you can do to try and alleviate the problem is to:
- Restart the vehicle
- Unplug and replug the power steering cable
- Inspect all power steering cables
- Check the intermediate steering shaft
You can refer to some of the following methods: