Are you struggling with a dim or burned out headlight on your 2015 Chrysler 200? Don’t worry, changing a headlight on this model is a simple and straightforward process that you can easily do on your own. In this article, we will provide you with a detailed step-by-step guide on how to change a headlight on a 2015 Chrysler 200. So, grab your tools and let’s get started!

Tools Needed:

How to Change a Headlight on a 2015 Chrysler 200 A Step-by-Step Guide
  1. Replacement bulb (refer to your owner’s manual for the correct type)
  2. Flathead screwdriver
  3. Phillips head screwdriver
  4. Clean cloth or paper towel
  5. Latex gloves (optional)

Step 1: Prepare Your Vehicle

How to Change a Headlight on a 2015 Chrysler 200 A Step-by-Step Guide

Before starting the actual process of changing the headlight, there are a few things you need to do to prepare your vehicle. First, park your car on a level surface and turn off the engine. Next, make sure the headlights and the ignition are turned off. Then, locate the hood release lever and open the hood of your vehicle.

Sub-heading 1: Wear Gloves (Optional)

While it’s not necessary, wearing latex gloves can help protect your hands from any dirt, oil, or grease on the headlight assembly. It also prevents oils from your skin from getting onto the replacement bulb, which can cause it to burn out faster.

Sub-heading 2: Inspect the Headlight Assembly

Take a moment to inspect the headlight assembly to determine which bulb needs replacement. The low beam headlight is located at the outer edge, while the high beam headlight is located on the inner side. Make sure you have the correct replacement bulb before proceeding.

See also  How to Click Beautiful Selfies Tips and Tricks for Capturing the Perfect Shot

Step 2: Remove the Headlight Assembly

How to Change a Headlight on a 2015 Chrysler 200 A Step-by-Step Guide

To access the headlight bulbs, you need to remove the headlight assembly first. To do this, locate the three plastic clips on the top of the headlight assembly and use a flathead screwdriver to gently release them. Next, remove the two retaining screws located at the front of the headlight assembly using a Phillips head screwdriver. Once all the screws and clips are removed, carefully pull the headlight assembly towards you.

Sub-heading 1: Check for Any Corrosion or Damage

While the headlight assembly is out, it’s a good idea to check for any corrosion or damage that may have occurred. If you notice any, clean or replace the affected parts before re-installing the assembly.

Sub-heading 2: Disconnect the Electrical Connector

Once the headlight assembly is out, locate the electrical connector at the back of the headlight bulb. Press the tab and gently pull the connector to disconnect it from the bulb.

Step 3: Remove the Old Bulb

How to Change a Headlight on a 2015 Chrysler 200 A Step-by-Step Guide

Now, it’s time to remove the old bulb and replace it with a new one. To do this, grip the base of the bulb and twist it counterclockwise to unlock it. Gently pull the old bulb out of the socket and dispose of it properly.

Sub-heading 1: Clean the Headlight Assembly

Before installing the new bulb, take a moment to clean the headlight assembly with a clean cloth or paper towel. This will ensure that there is no dirt or debris that can affect the performance of the new bulb.

Sub-heading 2: Install the New Bulb

Insert the new bulb into the socket and twist it clockwise to lock it in place. Make sure it is secure and not loose.

See also  How to Change Turn Signal Bulb in a 2023 Dodge Durango

Step 4: Reconnect the Electrical Connector

How to Change a Headlight on a 2015 Chrysler 200 A Step-by-Step Guide

Once the new bulb is installed, reconnect the electrical connector by pushing it onto the base of the new bulb until you hear a click.

Sub-heading 1: Check the Headlight Alignment

Before re-installing the headlight assembly, turn on your headlights to check the alignment. If it seems off, you can adjust it by turning the screws located on the back of the assembly.

Sub-heading 2: Re-install the Headlight Assembly

Carefully place the headlight assembly back into its original position and secure it with the retaining screws and plastic clips.

Step 5: Test the New Bulb

Now that the new bulb is installed and the headlight assembly is back in place, it’s time to test it out. Turn on your headlights and make sure both the high beam and low beam are working properly.

Sub-heading 1: Repeat the Process (if needed)

If you need to change the other headlight, simply repeat the same process on the opposite side.

Sub-heading 2: Dispose of Old Bulbs Properly

It’s important to dispose of old bulbs properly. If they are still in good condition, consider donating them to a local repair shop or recycling center.

FAQs

Q: How often should I replace my headlights?

A: It is recommended to replace your headlights every 2-3 years or whenever they start showing signs of dimming or burning out.

Q: Do I need to replace both headlights at the same time?

A: It is not necessary to replace both headlights at the same time unless they are both showing signs of malfunctioning.

See also  How to Change the Headlight on a 2015 Nissan Altima A Step-by-Step Guide

Q: Can I use any type of replacement bulb for my 2015 Chrysler 200?

A: No, it is important to refer to your owner’s manual for the correct type of replacement bulb for your specific model.

Q: Do I need any special tools to change a headlight on a 2015 Chrysler 200?

A: No, you only need basic tools such as a screwdriver and replacement bulb.

Q: Can I change a headlight on my 2015 Chrysler 200 myself?

A: Yes, it is a simple process that can be done at home with the right tools and instructions.

Conclusion

Changing a headlight on a 2015 Chrysler 200 may seem intimidating at first, but with the right tools and instructions, it can easily be done at home. By following this step-by-step guide, you can save time and money by not having to take your car to a repair shop. Remember to always refer to your owner’s manual for specific instructions and to properly dispose of old bulbs. With a new headlight, you can drive safely and confidently knowing that your vehicle is equipped with fully functioning headlights.