If you own a 2013 Ford Edge, you may eventually need to change a headlight due to a burnt out bulb or a damaged housing. While it may seem like a daunting task, changing a headlight on a 2013 Ford Edge is actually quite simple and can save you time and money compared to taking it to a mechanic. In this article, we will break down the steps involved in changing a headlight on a 2013 Ford Edge and provide helpful tips along the way.

Step 1: Gather Your Materials

How to Change a Headlight on a 2013 Ford Edge

Before beginning the process of changing a headlight on your 2013 Ford Edge, it is important to have all the necessary materials and tools ready. This will save you time and frustration as you won’t have to stop midway through the process to search for a missing tool. Here are the items you will need:

Materials:

  • Replacement headlight bulb
  • Clean cloth or gloves
  • Screwdriver
  • Duct tape (optional)

Tools:

  • Jack stands or ramps
  • 10mm socket wrench
  • Flathead screwdriver
  • Pliers

Step 2: Prepare Your Vehicle

How to Change a Headlight on a 2013 Ford Edge

It is important to take safety precautions before working on your vehicle. Follow these steps to prepare your 2013 Ford Edge for changing a headlight:

1. Turn off the engine and headlights

Make sure your vehicle is turned off and the headlights are switched off before starting any work.

2. Locate the battery

The battery in a 2013 Ford Edge is located under the hood on the driver’s side. Make sure the negative (-) terminal is disconnected before proceeding.

3. Use jack stands or ramps

To access the headlight, you will need to raise the front of your vehicle using either jack stands or ramps. This will give you enough space to work comfortably.

See also  How to Change a Headlight on a 2007 Chevy Tahoe A Step-by-Step Guide

Step 3: Remove the Headlight Assembly

How to Change a Headlight on a 2013 Ford Edge

Now that your vehicle is prepared, it’s time to remove the old headlight bulb and assembly. Follow these steps:

1. Locate the back of the headlight assembly

The back of the headlight assembly is located behind the headlight on the inside of the engine compartment.

2. Remove the retaining clips

There are two retaining clips holding the headlight assembly in place. Use a flathead screwdriver to carefully pry them off.

3. Disconnect the electrical connector

Once the retaining clips are removed, unplug the electrical connector from the back of the headlight assembly.

4. Remove the headlight assembly

Carefully pull the headlight assembly out and set it aside.

Step 4: Replace the Headlight Bulb

How to Change a Headlight on a 2013 Ford Edge

With the headlight assembly removed, it’s now time to replace the old headlight bulb with a new one. Here’s how:

1. Remove the old bulb

Gently twist the old headlight bulb counterclockwise and pull it out of the headlight assembly.

2. Clean the headlight assembly

Use a clean cloth or gloves to wipe down the inside of the headlight assembly. This will ensure there is no dirt or debris before installing the new bulb.

3. Install the new bulb

Insert the new headlight bulb into the headlight assembly and turn it clockwise to lock it in place.

Step 5: Reassemble the Headlight

How to Change a Headlight on a 2013 Ford Edge

With the new headlight bulb installed, it’s time to put everything back together. Follow these steps:

1. Reattach the headlight assembly

Carefully slide the headlight assembly back into place and secure it with the retaining clips.

See also  How to Change a 2013 Nissan Altima Headlight Bulb

2. Reconnect the electrical connector

Plug the electrical connector back into the headlight assembly.

3. Test the new headlight

Turn on your vehicle and test the new headlight to make sure it is working properly.

FAQs

What type of headlight bulb does a 2013 Ford Edge use?

The type of headlight bulb used in a 2013 Ford Edge can vary depending on the trim level. However, most models use an H11 halogen bulb for both low and high beams.

Can I change a headlight on my 2013 Ford Edge without raising the vehicle?

While it is possible to change a headlight without raising the vehicle, we highly recommend using jack stands or ramps for safety and ease of access.

How often do I need to change the headlight bulb on a 2013 Ford Edge?

The lifespan of a headlight bulb can vary, but it is recommended to check your headlights every six months to ensure they are working properly. If one bulb burns out, it is a good idea to replace both bulbs at the same time.

Can I replace a headlight on my 2013 Ford Edge by myself?

Yes, changing a headlight on a 2013 Ford Edge can easily be done by yourself with the right tools and instructions.

Is there a difference between the driver side and passenger side headlight on a 2013 Ford Edge?

Yes, the driver side and passenger side headlight bulbs are different and cannot be swapped. Double-check the part number before purchasing replacement bulbs to ensure you have the correct one for your specific headlight.

Conclusion

Changing a headlight on a 2013 Ford Edge may seem intimidating, but with the right tools and instructions, it can be a simple process. By following these steps and taking safety precautions, you can easily replace a headlight on your own and save time and money compared to going to a mechanic. Remember to always check your headlights regularly and replace both bulbs if one burns out to ensure proper lighting on the road.